Numeric Keypad; Connecting A Numeric Keypad - Fujitsu LifeBook S-4530 Instructions Manual

SECTION 2

7. Numeric Keypad

Connecting a Numeric Keypad

This item explains how to connect a numeric keypad.
1 Switch off the main switch.
Slide the main switch in the direction of the
arrow ( side).
Critical Point
The numeric keypad can be connected while the computer is being suspended.
The numeric keypad can be used only when the computer is set in the numeric keypad operation
mode.
When a mouse is connected to the numeric keypad
mouse connector, the mouse connector on the
computer main unit cannot be used.
You can adjust the tilt of the numeric keypad with
the tilt feet on the bottom of the numeric keypad.
58
Main switch
2 Plug the cable of the numeric keypad
into the expansion keyboard connector
on the rear panel of the port replicator.
Have the arrow marked on the connector
facing up.
Mouse connector