Fujitsu LifeBook S-4530 Instructions Manual page 79

1.1.2 Main - Primary Master and Primary Slave Menu
Main
Type:
Multi-Sector Transfers: [Disabled]
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
F1 Help
ESCExit
Figure 1-2a Main - Primary Master and Primary Slave Menu
Setup Item Selections
Type Auto
None
CD-ROM
ATAPI Removable
User
Multi-Sector Disabled
Transfers
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
PhoenixBIOS Setup Utility
Advanced Security Power
Primary Slave [UJDA310-(PS)]
[Auto]
[Disabled]
[Fast PIO 4]
[Disabled]
›fl Select Item -/Space
‹fi Select Menu Enter
Boot Info Exit
Item Specific Help
Select ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-type
the drive on boot
time.
Except [Auto]
You enter parameters
of the drive.
[None]
The drive is disabled.
Change Value F9 Setup Defaults
Select :Sub-Menu F10Save and Exit
Note (Item Specific Help)
Select ATA/ATAPI device type. If 'Auto' is
selected, the type is automatically identified at
POST by the BIOS. It does not carry out
Cylinder/Head/Sector display in the case of
over 8.4GB-HDD when Auto mode. If 'None'
is selected, all of the following setup items do
not appear. When 'User' is selected, you can
specify Cylinders, Heads and Sectors.
User = you enter parameters of hard-disk drive
installed at this connection.
Auto = autotypes ATA/ATAPI drive installed
here.
CD-ROM = a CD-ROM drive is installed here.
ATAPI Removable = removable disk drive is
installed here.
This option can not be changed when 'Auto'
is selected.
Specify the number of sectors per block for
multiple sector transfer.
71