Removing The Ccd Camera From Personal Computer - Fujitsu LifeBook S-4530 Instructions Manual

Removing the CCD camera from personal computer

When the CCD camera was used as it was externally connected to the personal computer
1 Connect the CCD camera to the CCD
camera unit.
Plug the connector of the CCD camera with
its flat side up into the jack of the unit.
2 Lock the CCD camera
Tilt down the CCD camera keeping its upper
part leveled with the lower part. Make sure
the CCD camera is locked by the projecting
catch.
3 Push the CCD camera
Pressing the Eject button on the CCD camera
unit (1), gently push the CCD camera into
the unit (2).
When the CCD camera was used with CCD camera unit built in the personal computer
1 Push back the CCD camera into the CCD camera unit.
"When the CCD camera was used as it was externally connected to the personal computer".
Step 2 and 3.
2 Remove the CCD camera unit from the personal computer.
"Replacing mobile multibay unit"
Flat side
Projecting catch
2
1
Eject button
65