Table of Contents
Advertisement
Setup Item
Selections
Standby Timeout
Off
1 Minute
2 Minutes
4 Minutes
6 Minutes
8 Minutes
12 Minutes
16 Minutes
Auto Suspend
Off
Timeout
5 Minutes
10 Minutes
15 Minutes
20 Minutes
30 Minutes
40 Minutes
60 Minutes
Suspend Mode
Suspend
Save To Disk
Auto Save To Disk
Off
After 1 Hour
Resume On Modem
Off
Ring
On
Resume On Time
Off
On
Resume Time
00:00:00 to 23:59:59
Advanced Features
Power Saving Mode
Disabled
Customized
Maximum Power Savings
Maximum Performance
Table 1-14 Preset values for each Power Saving Modes
Table 1-13 Power menu options
Hard Disk
Video
Off
Off
Off
Off
30 Seconds 2 Minutes
Off
Off
Note (Item Specific Help)
Amount of time the system needs to be
inactive before entering the Standby Mode.
Standby Mode turns off various devices in the
system, including the screen, until you start
using the computer again.
Amount of time the system needs to be
inactive before entering the Suspend Mode.
Select the type of Suspend Mode. If you
choose Save To Disk the system will save its
state to disk and power off. If you choose
Suspend the system will save its state but
remain in a low power mode. If you choose
Suspend then you also have the option of
choosing Auto Save To Disk.
Turn on or off the Auto Save To Disk feature.
When Auto Save To Disk is turned on, the
system will save its state to disk and then
power off after being in Suspend mode for a
period of time.
Turning this feature on will wake the system
up when an incoming call is detected on your
modem in Suspend Mode.
Turning this feature on will wake the system
up at 'Resume Time' from Suspend Mode.
Specify the time when the system is to wake
up. <Tab>, <Shift-Tab>, or <Enter> selects
field.
Allows
editing
of
management features.
Standby Auto Suspend
Off
Off
4 Minutes
15 Minutes
1 Minute
5 Minutes
Off
15 Minutes
advanced
power
87
Advertisement
Table of Contents
