Table of Contents
Advertisement
Working with the notebook
Virtual numeric keypad
Num Lock
Virtualnumerickeypad
Numeric keypad
To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual
numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers
and symbols printed in the upper right corner of each key. If you have switched on the virtual
numeric keypad, you can output the characters shown on the upper right of the keys.
The keyboard layout shown below may differ from your actual device.
1 = Valid characters when the
key is not activated
Further information about the status indicators can be found in chapter
Default settings
With default settings, each button must be pressed in combination with
to enter the characters of the virtual numeric keypad.
In the BIOS setup utility, you can enable the function that allows you to enter the
characters of the virtual numeric keypad directly without
► To do so, in the Advanced-Keyboard Features menu select On or Off instead of On/Padlock Off.
With Windows, the Num Lock function can still be switched on and off using the
Num key regardless of whether On or
Country and keyboard settings
► Change the country and keyboard settings as described in the documentation for your operating
system.
40
Num
2 = Valid characters when the
Off
key is activated
"Status indicators", Page
Fn
Fn
.
is set in the BIOS.
Num
20.
in order
Fujitsu
Advertisement
Table of Contents
