Quick Start Set The Clock And Go - TOTALINE Intellistat Owner's Manual

Quick Start
Set the Clock and Go
SET CLOCK
Press the SET CLOCK
button.
:
12:00
Am
S
Press the SET CLOCK
button as above to
return to normal
operation.
TIP: Hold the Fan button in while pressing up or down to rapidly
advance the hours in Set Clock.
This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
During Setup & Programming:
Pressing the Up and Down
buttons will modify the flashing
selection.
.
(Represented in dark black)
Press
MODE
SET CLOCK
Page 5
To adjust the
clock or Day use
buttons.