Quick Start; Set The Clock And Go - TOTALINE P374-1100FM Owner's Manual

Quick Start

Set the Clock and Go

Press the Mode button.
While holding the Mode,
MODE
press the Fan button for
2 seconds to enter Setup
FAN
screens.
I
I2:00
2
Su
Press both Mode and
Fan buttons as
above to return to
normal operation.
The thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment* without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
* The thermostat is not preprogrammed from the
factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the
Advanced Setup section, pages 12 - 15.
During Setup & Programming:
Pressing the Mode button
selects different flashing items.
(Represented in dark black)
Pressing the Up and Down
buttons will modify the flashing
selection.
Press clock or Day use
MODE
MODE
FAN
Page 5
To adjust the
buttons.