Quick Start Set The Clock And Go - TOTALINE P474-1020 Owner's Manual

Quick Start
Set the Clock and Go
Press the On/Off button.
While holding the On/Off
ON/OFF
press the Outside button
for 2 seconds to enter Setup
OUTSIDE
screens.
I
I2:00
2
Su
Press both On/Off and
Outside buttons as
above to return to
normal operation.
The thermostat is preprogrammed from the
factory to operate without the need for further
programming. To optimize the installation
of this thermostat follow the instructions
in the Advanced Setup section.
During Setup & Programming:
Pressing the Mode button
selects different flashing items.
(Represented in dark black)
Pressing the Up and Down
buttons will modify the flashing
selection.
Press
ON/OFF
ON/OFF
OUTSIDE
Page 5
To adjust the
clock or Day use
buttons.