Quick Start Set The Clock And Go - TOTALINE Easy Stat Owner's Manual

Quick Start
Set the Clock and Go
SET CLOCK
Press the SET CLOCK
button.
:
12:00
Am
Press the SET CLOCK button as above to
return to normal operation, after setting the clock.
This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
During Setup & Programming:
Pressing the Up and Down
buttons will modify the flashing
selection.
.
(Represented in dark black)
To adjust the
To adjust just the Hours;
hold the Fan button in
while
Down buttons.
SET CLOCK
Page 4
clock use
buttons.
pressing the Up or