Table of Contents
Advertisement
Operation instruction
2
Mode Fan Speed Swing
Temperature
Clock
Timer
Aux.HeatFileter Reset
About FAN operation
FAN operation refers the air conditioner does not perform COOLING and HEATING
operation, but FAN operation. In this mode, the air conditioner cannot perform
AUOT FAN operation, and does show the temperature value on the wire controller.
6
Turn on the unit
1
Press the ON/OFF button to turn on the
unit The LCD display of the wire
controller will show the previous
working state (except for Timer, Sleep,
3
Swing mode), the operation indicator
Set
light on the wire controller will light up.
Choose of working mode
2
Sleep
Press MODE button, each press the working
Reset
mode will change as the following sequence:
AUTO COOLING DEHUMIDIFYING
4
ON/OFF
HEATING FAN,
1
Choose FAN operation.
3
Adjusting FAN SPEED
Press the FAN SPEED button to change fan
speed:
Choose the desired fan speed
Turn off the unit
4
Press the ON/OFF button to turn off the unit.
The wire controller only shows the clock and
room temperature.
Fan operation
AUTO COOLING DEHUMIDIFYING HEATING FAN
LOW FAN
MED FAN
HIGH FAN
LOW FAN MED FAN HIGH FAN
Advertisement
Table of Contents
