Troubleshooting - Diamondback 510Ic Owner's Manual

Indoor cycle
Hide thumbs Also See for 510Ic:
Table of Contents

Advertisement

The Fitness Test requires you to use the contact heart rate sensors on the handlebars. During the
program, you must remain relaxed and hold the heart rate sensors.
To launch the Fitness Test program, press the FIT TEST bu on on the keypad. A one-minute mer
will begin to count down. Only the countdown clock value and current heart rate will be displayed.
When the program concludes, your rela ve fi tness ra ng will be displayed in the Matrix Display. The
returned values range from F1 to F6. See the chart above. This ra ng is only a guideline and not meant
to serve as professional, medical or health informa on.
Press the START-STOP key to end the program and return to the main screen at any me.

TROUBLESHOOTING

Problem:
Display will not light up.
Solu ons:
1) Check AC Power Supply, make sure there is power to the plug in / wall outlet.
2) check all wire connec ons, disconnect and reconnect all wires put together during assembly. Look at all
connectors while disassembled, make sure no wires are pulled out and that no pins are bent and or pushed in.
3) Call your dealer for further assistance.
Problem:
Loose or clicking pedals.
Solu ons:
1) Tighten the pedal and or crank arms
Problem:
Plas cs misaligned or rubbing sound.
Solu ons:
1) Loosen screws, realign plas c side case and ghten
2) Check brackets
510Ic Owner's Manu
29
al
TROUBLESHOOTING

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents