Diamondback 510Ic Owner's Manual page 11

• Install the saddle (L) onto the seat post and ghten with the
included wrench.
• Install the pedals (F-L & F-R) into the crank arms. Threading the
le pedal (marked with an "L") by hand into the le crank with
counter-clockwise rota on
a
cranks/pedals. The pedal must be ght and installed completely
to prevent future damage to the cranks.
• Repeat the pedal installa on steps for the right side, no ng
that the pedal will thread into the right crank with a
rota on.
. Do not cross-thread the
clockwise
510Ic Owner's Manu
ASSEMBLY INSTRUCTIONS
• Install the handlebars by sliding the bracket up under the
handlebar mast (B) Feed the Heart Rate Console Wire (B-11)
through the opening under the mast and pull it up and out with
the wire harness.
• Posi on the Handlebars (B-5) in 1 of 3 possible posi ons
depending on user preference and install the 4 (H-4) Handlebar
Assembly Posi oning Screws into place and ghten with
the 6mm allen wrench securing the Handlebars (B-5) to the
Handlebar Mast (B).
• Make sure not to pinch the the Heart Rate Console Wire (B-11).
9
al