Prepare the hard drive.
2.
Install the hard drive.
3.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
4.
SATA hard drive LED
Removing a hot-plug SAS hard drive
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
1.
SATA hard drive LED
Back up all server data on the hard drive.
2.
combinations" on page 15).
For proper cooling do not operate the server without the access panel, baffles,
combinations" on page 15).
("SAS and
("SAS and
Hardware options installation 47