Remove the fan blanks in bays 5 and 6.
17.
Install the fans into bays 5 and 6.
18.
Install the PCI riser cage (on page 23).
19.
Install the access panel (on page 22).
20.
Install the server into the rack.
21.
Power up the server (on page 20).
22.
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
Installing the Trusted Platform Module board (on page 42).
1.
Retaining the recovery key/password (on page 43).
2.
Enabling the Trusted Platform Module (on page 44).
3.
Hardware options installation 41