Notes:
•
"Primary" denotes the risers are installed in the primary riser connector.
•
"Secondary" denotes the risers are installed in the secondary riser connector.
•
FL/FH denotes full-length, full-height. HL/FH denotes half-length, full-height. LP denotes low profile.
•
The PCIe x16 riser supports a maximum power of 225W with an HP power cable. This cable must
be used for PCIe card wattages greater than 75W.
System board
System board components
Item
Description
1
Processor 1 DIMM slots
2
Primary SAS power connector
3
Secondary SAS power connector
4
Front I/O connector
5
SATA optical drive connector
6
USB connector
7
System battery connector
8
TPM connector
9
NMI jumper
Component identification 12