Table of Contents
Advertisement
3.
Perform the setting.
Controller
4.
Close the window.
After the setting is completed, click "
1
Set Auto Pan operation in the pull down menu
of [MODE].
• Right : Rotates to the right horizontally
from the start position.
• Left
: Rotates to the left horizontally
from the start position.
• Return : Moves continuously between the
start and return positions in the
horizontal direction.
2
Set the speed of operation in the pull down
menu of [Speed].
• High
• Normal
• Low
3
Set the starting position of operation.
Set the start position using the Pan/Tilt panel
and click "
". If Pan/Tilt is operated after
setting the start position, it can be returned to
the start position by clicking "
3
Set the return position of operation.
(Setting is possible only when the setting of
[Mode] is set to "Return")
Set the return position using Pan/Tilt panel
and click "
". If Pan/Tilt is operated after
setting the return position, it can be returned
to the start position by clicking "
" to close the window.
Note
• For starting and stopping the operation of
Auto Pan, Auto Patrol and Auto Trace, re-
fer to page 47.
".
".
65
Advertisement
Table of Contents
