Settings (Step 3 Setting with V.Networks Controller)
3-5 Frame Rate
With [V.Networks Controller], it is possible to set the frame rate, the number of
image updates per second, for JPEG.
1.
Select [Setting] and [Framerate].
2.
Set the frame rate in the [Frame Rate] screen.
Note
The actual number of frames received and displayed per second is affected by factors such as
the PC performance and the image compression rate as well as the LAN environment.
In the case of a LAN environment where multiple operations are being performed at one time
(particularly where the network traffic is always heavy), reduce the number of frames to be
transmitted.
Caution
Frame rate for local recording is independent of this setting and cannot be set with [V.Networks
Controller]. It is only possible with [V.Networks Setup Tool]. (
60
Sets the maximum number of images per
second that are sent from VN-C655. This
value is set to "15" at the factory.
☞
Page 34)