Table of Contents
Advertisement
Settings (Step 3 Setting with V.Networks Controller)
3-4 Setting the Image Quality (continued)
Quality Setting (continued)
Item
ExDR Level
(Continued)
V.Sharpness
BLC
58
Function & Setting
To make a low-light section of the object easy to view: In-
crease the level.
To make a highlighted section of the object easy to view:
Decrease the level.
Setting values : -5 to 5
• When the difference in brightness between objects is
large, the picture may not change even when the ExDR
LEVEL is varied. This is due to the characteristics of the
camera and is not a malfunction.
• When the item "SHUTTER" is set to 1/250 or higher,the
settings to the item "ExDR LEVEL" cannot be carried out.
• When the item "ExDR MODE" is set to OFF, the settings
for the item "ExDR LEVEL" cannot be varied.
This function sets sharpness in the vertical direction of the
image.
NORMAL: Normal sharpness.
HIGH: High sharpness.
The following phenomena may be observed when HIGH
is selected. This is not a malfunction.
* Horizontal stripes are observed on bright objects.
* Vague horizontal stripes are observed under low light
conditions.
Sets of area of back light compensation. Use this function
when the object appears dark (under auto iris control)
because of the presence of a bright light source behind it.
This function make it possible to place the unnecessary
light source outside the photometry area.
OFF
ARER 1 to AREA 4 : When the SET button is pressed, the
Photo-metering Area
When the item "ExDR MODE" is set to ON, the item "BLC"
is set to OFF. Under this condition, the settings to the item
"BLC" cannot be varied.
: The backlight compensation func-
tion does not work.
fixed light metering areas displayed.
Select one of the four types.
Initial Value
0
NORMAL
OFF
Advertisement
Table of Contents
