Table of Contents
Advertisement
Settings (Step 2 Setting the Network)
2-4 Other Setting with V.Networks Setup Tool [9. Private Mask Setting]
Use the PRIVATE MASK screen to set up the private mask function, which grays out areas that
are not required to be included in the monitored picture.
Up to four private masks can be set per screen, and up to eight private masks can be set in total.
1.
Start up [V.Networks Setup Tool] and select [Private Mask].
2.
When all the settings have been completed, click "
48
Set [Private Mask] to "ON".
(Initial value: OFF)
Select the private mask number from Mask
No.1 to 8.
Click "
" to edit the private mask.
The mask area (black color) will be displayed
on the live screen.
Move the mask area (black color) to the
center of the area to be masked using the
controller for setting private mask.
Set the range of the mask area using the
of the controller for private mask setting.
After the area is determined, click "Save" to
save the setting.
When setting multiple masks, repeat step
3
and
to set.
Note
Mask area (black color) will not be dis-
played in the following cases even
when it is set:
● When the tilt angle of the camera is
45˚ or higher
● When 4 or more mask areas are be-
ing set on the screen.
" to end.
2
Advertisement
Table of Contents
