Settings Step 3 Setting With V.networks Controller - JVC VN-C655 Instructions Manual

Settings (Step 3 Setting with V.Networks Controller)
3-1 Starting Up V.Networks Controller
With the installed Controller, camera images can be monitored. The settings for
recording, replay and frame rate etc. can also be performed.
1.
Select [Start], [Programs], [V.NETWORKS] and then
up [V.Networks Controller].
Note
• If a password has been set, enter the correct password.
• This [Controller] can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (only for JPEG), VN-
A1, VN-C10, VN-C11 and VN-C655.
50
[V.Networks Controller] to start
1
In the pull down menu, select the camera
to connect.
Caution
After the power for VN-C655 is turned
on, there will be about 20 seconds until
VN-C655 becomes ready to be con-
nected with the PC. This is not a de-
fect.
2
Live images from the camera are displayed.