Maintaining The Printer; Storing Supplies; Cleaning The Printer; Cleaning The Exterior Of The Printer - Lexmark X560 Maintenance Manual

Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
Direct sunlight
•
Temperatures above 35°C (95°F)
•
High humidity above 80%
•
Salty air
•
Corrosive gases
•
Heavy dust
•

Cleaning the printer

If print quality problems such as streaking occur, follow these cleaning procedures.
Warning—Potential Damage: Do not put water directly on the printer or use ammonia-based cleaners or volatile
solvents, such as paint thinner, on the printer.

Cleaning the exterior of the printer

1
Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock, unplug the power cord from the wall outlet
and disconnect all cables to the printer before proceeding.
2
Remove paper from the standard exit bin.
3
Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of the
printer.
4
Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the standard
exit bin.
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.
5
Make sure the standard exit bin is dry before beginning a new print job.
Maintaining the printer
3