Physical Interface & Button - Planet VIP-158 User Manual

Physical Interface & Button
1 RESET
2 5V DC
3 LAN
4 Phone
Machine default IP is http://192.168.0.1. Press RESET
Note
button on rear panel over 5 seconds will reset the VoIP Phone
Adapter to factory default value. (Except speed dial and
call forward settings)
LED Display
PWR
LNK/ACT
RING
Reset to the factory default setting
5V DC Power input outlet
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
RJ-11 connector, connected directly to the analog phone.
Power is supplied to the device.
OFF: the device is disconnected to LAN.
ON: the device is connected to LAN.
OFF: the phone is idle.
ON: the phone is in use (off-hook).
Blinking: the phone is ringing.
- 7 -