Table of Contents
Advertisement
Parameter Description
IP Address
Subnet Mask
Default Gateway
DNS
PPPoE Username
PPPoE Password
PPPoE IP
PPPoE DNS
Connect Type
MAC
Version
Connection Type Description
SIATIC IP
DHCP client
PPPoE
After confirming the modification you've done, please click on the SUBMIT button to apply settings
effective and the ATA will be reload page automatic by itsely, that you must to afresh enter the final
modification IP address for logon web management.
LAN IP Address of the ATA
Default : 192.168.0.1
LAN mask of the ATA
Default : 255.255.255.0
Gateway of the ATA
Default : 192.168.0.254
DNS server of the ATA
Default : Null
PPPoE user name of the ISP provider
Default : Null
PPPoE pass word of the ISP provider
Default : Null
System will get the IP address when your PPPoE is connection
Default : 0.0.0.0
System will get the DNS when your PPoE is connection
Default : 0.0.0.0
Connect Type of the ATA
Default : STATIC
Show the MAC address of the Ethernet interface.
Default : 00304Fxxxxxx
Show the firmware version
Default : 1.0.0
The ISP will assign IP Address, and related information.
In most circumstances, it is no need to configure the DHCP settings.
The ISP will assign PPPoE username / password for Internet access.
- 11 -
Advertisement
Table of Contents
