Table of Contents
Advertisement
Parameter Description
RTP Port
RTP TOS (0 - 255)
Default Codec
Packet Size
Jitter Buffer
VAD
LEC
DTMF Command
DTMF Payload Type
(96-127)
Speaker Volume
Mic. Gain
Tone Volume
Tone County
Initial port number for sending RTP packets.
Default : 4100
Type of Service value for Quality of Service.
Default : 160
Set the default voice codec to be "G.711 u-law", "G.711 a-law" or
"G.729A".
Default : G7.11 u-law
The size of one RTP packet (which is sent out on every specified time
cycle, from 10ms to 60ms).
Default : 20ms
Set the jitter buffer delay time (from 10ms to 60ms)
Default : 60ms
Set the VAD (voice activity detection) function
Default : Disable
Set the LEC (Line Echo Cancellation) function
Default : Enable
Set the DTMF command to be "INBAND", "RFC2833" or "SIP-Info"
Default : INBAND
Set the DTMF Payload Type (from 96 to 127).
Default : 101
Set the speaker volume of the analog phone in dB unit.
Default : - 8
Set the microphone gain of the analog phone in dB unit.
Default : - 8
Set the tone volume of the analog phone in dB unit.
Default : - 5
Set the tone rule specification with the associated country name
(CCITT, USA, BT, and Brazil).
Default : USA
- 15 -
Advertisement
Table of Contents
