Security Button - Planet PL-551 User Manual

The lower panel contains a history of all remote devices.
Devices are shown here regardless of whether or not they are on the same
logical network.

Device Name

MAC Address

Password

Rate(Tx/Rx)

Network

Last Seen

Last Known Network

Chipset manufacturer name (Turbo Only devices)

Date device last scanned

3.5 Security Button

This section describes how to use Security button for configuration in the
following situations:

Establish a new security network (Network AB)
The procedure is as follows:
1. Press the security button on the Powerline (a) during 1~3 seconds.
2. Press the security button on the Powerline (b) during 1~3 seconds.
3. The PWR LEDs start to flash.
4. After a few seconds, the PWR and HP LEDs should be on. The connection of
Network AB is success.
21