Starting The Computer By Password; Power-Up Modes; Hot Keys; Panel Power On/Off - Toshiba NB 100 Series User Manual

Starting the computer by password

If you have already registered a password, please enter the password
manually to start the computer:
To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 3,
At this point, the hot keys Fn + F1 to F9 do not work. They will function
after you enter the password.
2. Enter the password.
3. Press Enter.

Power-up modes

The computer has the following power-up modes:
■
Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■
Hibernation: Data in memory is saved to the hard disk.
■
Standby: Data is maintained in the computer's main memory.
Refer also to the sections
in Chapter 3,

Hot keys

You can use hot keys Fn + F2 to enter hibernation mode. See Chapter 5,
The Keyboard

Panel power on/off

You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
standby or hibernation mode but not in boot mode.
If the panel power off function is enabled and use Shut down Windows, do
not close the display until the shut down function is completed.

System auto off

This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in standby mode or hibernation mode.
User's Manual
lowing message appears:
Username
Getting Started
for details.
Turning on the power
.
Power and Power-up Modes
Getting Started. The fol-
and Turning off the power
6-11