Table of Contents
Advertisement
Drivers Installation Guide
Load BIOS Defaults
Choose this item and the following message appears:
To use the BIOS defaults, change the prompt to ÒYÓ and press <Enter>.
Note: BIOS DEFAULTS values are adjusted for high performance. If
you run into any problems after loading BIOS DEFAULTS, please
load the SETUP DEFAULTS for the stable performance.
Integrated Peripherals
The Integrated Peripherals option changes the values of the chipset
registers. These registers control system options in the computer.
Note: Change these settings only if you are familiar with the Chipset.
Run the Integrated Peripherals as follows.
1. Choose ÒIntegrated PeripheralsÓ from the Main Menu and the
following screen appears.
settings.â
IDE HDD Block Mode
PCI Slot IDE 2nd Channel : Enabled
On-Chip Primary
On-Chip Secondary PCI IDE: Enabled
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
Onboard Parallel Port
Onboard Parallel MODE
ECP Mode Use DMA
Paralel Port EPP Type
2. Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
ÒLoad BIOS Defaults (Y/N)?NÓ
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
PCI IDE: Enabled
: Auto
: Auto
: Auto
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Standard
: 378H/IRQ7
: ECP/EPP
: 3
: EPP1.7
(The screen below shows default
ESC : Quit
F1
: Help
PU/PD/+/– : Modify
F5
: Old Values (Shift)F2 : Color
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
33
: Select Item
Advertisement
Table of Contents
