Integrated Peripherals - SOYO 5ehm User Manual

BIOS Setup

Integrated Peripherals

The Integrated Peripherals option changes the values of the chipset
registers. These registers control system options in the computer.
Note: Change these settings only if you are familiar with the Chipset.
Run the Integrated Peripherals as follows.
1. Choose ÒIntegrated PeripheralsÓ from the Main Menu and the
following screen appears.
settings:)
OnChip IDE First Channel
OnChip IDE Second Channel
IDE Prefetch Mode
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
Onboard FDC Controller
Onboard UART 1
Onboard UART 2
Onboard UART 2 Mode
2. Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
On-chip Primary PCI
IDE/
On-chip Secondary PCI
IDE
IDE Prefetch Mode
IDE HDD Block Mode
(The screen below shows default
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
Onboard Parallel Port
: Enabled
Parallel Port Mode
: Enabled
ECP Mode Use DMA
: Enabled
Parallel Port EPP Type
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
ESC : Quit
: Enabled
F1 : Help
: 3F8/IRQ4
F5 : Old Values (Shift)F2 : Color
: 2F8/IRQ3
F6 : Load BIOS Defaults
: Standard
F7 : Load Setup Defaults
Enabled Ð Use the on-board IDE
Disabled Ð Turn off the on-board IDE
Use the default setting.
Choose Enabled (default) or Disabled.
Enabled invokes multi-sector transfer
instead of one sector per transfer. Not all
HDDs support this function.
↑ ↓ → ←: Select Item
PU/PD/+/– : Modify
(default)
33
: 378/IRQ7
: ECP+EPP
: 3
: EPP1.9