Chipset Features Setup - SOYO SC-6TBxE User Manual

24

Chipset Features Setup

The Chipset Features Setup option changes the values of the chipset
registers. These registers control system options in the computer.
Note: Change these settings only if you are familiar with the Chipset.
Run the Chipset Features Setup as follows.
1. Choose ÒCHIPSET FEATURES SETUPÓ from the Main Menu and
the following screen appears. (The screen below shows default
settings.)
Auto Configuration
SDRAM CAS Latency Time
DRAM Data Integrity Mode : Non-ECC
System BIOS Cacheable
Video BIOS Cacheable
Video RAM Cacheable
8 Bit I/O Recovery Time
16 Bit I/O Recovery Time : 1
Memory Hole At 15M-16M
Passive Release
Delay Transaction
AGP Aperture Size (MB)
Spread Spectrum Modulated: Disabled
Note: The 6KBE does not support the temperature and voltage monitoring functions.
2. Use the arrow keys to move between items and select values. Modify
selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
Auto Configuration
SDRAM CAS Latency
Time
DRAM Data Integrity
Mode
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled CPU Speed
: 3
: Disabled CPU Warning Temperature
: Disabled Current CPU Temperature
: Disabled Current System Temp.
: 1 Current CPUFAN Speed
Current CHAFAN Speed
: Disabled VID(V) : 2.78 V
: Enabled 3.3(V) : 3.31 V
: Enabled +12(V) : 11.84V
: 64 –5(V)
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Enable this option (strongly
recommended) and the system
automatically sets all options on the left
side of the screen (except cache update
mode & BIOS cacheable).
If this option is Enabled you must boot
from Turbo mode.
Use the default setting.
Choose Non-ECC (default) or ECC
according to the DRAM type you have.
: 233MHz (66x3.5)
: Disabled
: 29 o C/84 o F
: 24 o C/75 o F
: 6553 RPM
: 5723 RPM
VTT(V) : 1.50V
+5 (V) : 4.97V
–12(V) : –11.45V
: –4.88V
↑ ↓ → ←
PU/PD/+/– : Modify
(Shift)F2 : Color
BIOS Setup
: Select Item