Chipset Features Setup - SOYO 6KB User's Manual & Technical Reference

24

Chipset Features Setup

The Chipset Features Setup option changes the values of the chipset
registers. These registers control system options in the computer.
Note: Change these settings only if you are familiar with the Chipset.
Run the Chipset Features Setup as follows.
1. Choose ÒCHIPSET FEATURES SETUPÓ from the Main Menu and
the following screen appears. (The screen below shows default
settings.)
Auto Configuration
DRAM Speed Selection
MA Wait State
EDO RAS# To CAS# Delay
EDO RAS# Precharge Time
EDO DRAM Read Burst
EDO DRAM Write Burts
DRAM Data Integrity Mode : Non-ECC
CPU-TO-PCI IDE Posting
System BIOS Cacheable
Video BIOS Cacheable
Video RAM Cacheable
8 Bit I/O Recovery Time
16 Bit I/O Recovery Time : 4
Memory Hole At 15M-16M
Passive Release
Delay Transaction
AGP Aperture Size (MB)
SDRAM RAS-to-CAS Delay
SDRAM RAS Precharge Time : Slow
Note: The 6KBE does not support the temperature and voltage monitoring functions.
2. Use the arrow keys to move between items and select values. Modify
selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
Auto Configuration
MA Wait State
EDO RAS# to CAS#
Delay
Drivers Installation Guide
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
SDRAM CAS Latency Time
: Enabled
Spread Spectrum Modulated : Disabled
: 60 ns
CPU Warning Temperature
: Slow
: 3
Current CPU Temperature
: 3
Current System Temp.
: x333
Current CPUFAN Speed
: x222
VID(V) : 2.78 V
3.3(V) : 3.31 V
: Enabled
+12(V) : 11.84V
: Disabled
–5(V)
: Disabled
: Disabled
: 4
: Disabled
ESC : Quit
: Enabled
: Disabled F1 : Help
F5 : Old Values (Shift)F2 : Color
: 64
F6 : Load BIOS Defaults
: Slow
F7 : Load Setup Defaults
Enable this option (strongly
recommended) and the system
automatically sets all options on the left
side of the screen (except cache update
mode & BIOS cacheable).
If this option is Enabled you must boot
from Turbo mode.
Use the default setting.
Use the default setting.
: 3
: Disabled
: 29
: 24
: 6553 RPM
VTT(V) : 1.50V
+5 (V) : 4.97V
–12(V) : –11.45V
: –4.88V
↑ ↓ → ←
: Select Item
PU/PD/+/– : Modify
o o
C/84 F
o o
C/75 F