Table of Contents
Advertisement
MENU DESCRIPTION AND NAVIGATION
Aspect Ratio allows selection of one of the three aspect ratios provided by the
processor. You have two options for selecting an aspect ratio: First, highlight
ASPECT RATIO on the main menu, then press ENTER. Then select the desired
aspect ratio, and again press ENTER. The second option is to simply press the UP
or DOWN arrows on the remote or front panel. Doing this will toggle you through
the three choices- Anamorphic (16:9), Letterbox and Standard (4:3). For more infor-
mation on aspect ratios, please refer to page 6-16.
Pass-Through Setup: This is only used with screens with masking capability.
When Pass-Through is selected as the source, the screen masking should be set for
the appropriate source. For example, on 4:3 screens, there should be no masking
for computer sources, but Top/Bottom masking should be activated when watching
DTV (anamorphic) sources. You may select either RGB HDTV (anamorphic), YUV
HDTV (anamorphic), or computer (4:3).
Picture Quality Adjustments
MAIN MENU
> COMPOSITE
S-VIDEO
COMPONENT
PASS THROUGH
ASPECT RATIO
PASS-THROUGH SETUP
Picture quality adjustments are those that change the various parameters of the
image, such as COLOR (saturation level) and BRIGHTNESS (black level), among
others. Typically, these adjustments should be made only once (during initial calibra-
tion) and then left alone. However, if it is necessary to make any adjustments, per-
form the following procedure:
In the example above, note that COMPOSITE is the active source. This is indicated
by an arrow to the left of the word 'COMPOSITE'. To make adjustments, highlight
the active source (composite in this case) and press ENTER.
Note:
Pressing ENTER after highlighting a different source will switch you to that
source instead of making picture quality adjustments.
ADJUST
TINT
COLOR
BRIGHTNESS
CONTRAST
SHARPNESS
LUMA ENHANCE
CHROMA ENHANCE
VCR MODE
6-13
Advertisement
Table of Contents
