Table of Contents
Advertisement
At the bottom of some menus, a line of 'hint' text also appears.
Time-outs !
Whenever there are on-screen menus such as when there is a slidebar, menu, message or test pat-
tern displayed, you have limited time in which to make a keypad entry before the graphic disap-
pears. These time-outs vary depending on the current display, as shown in the following chart:
Using Slidebars and Other Controls !
Most of the function menus allow you to change settings by using slidebars, checkboxes, and
pull-down lists. To select a slidebar, toggle a checkbox status, or view a pull-down list, do one of
the following within the function menu:
! Enter the menu option number corresponding to the setting you wish to change (for
! Or move the highlight to the desired parameter and press
! Or move the highlight to the option desired and press
! Or bypass the menus entirely and use a single key to immediately access an adjustment
Once selected, change the setting as desired (see below) and press
current function menu.
Slidebars in menus - The current value for a given parameter, such as
size or vertical stretch, appears to the left of its slidebar icon (window).
This number often expresses a percentage, or it may have units associated with it (such as pix-
els, degrees Kelvin, etc.), depending on the specific option. Press
adjust the setting up or down-both the number and the length of the bar change accordingly (for
continuous adjustment, hold down the desired arrow key). Or press
text box for specific number entry via the keypad, then press
press
Exit
Figure 3.4. Accessing General Help Topics
Slidebar (from pres.)
Slidebar (from menu)
Lamp Timer Msg.
Channel entry
Other
example, press
2
to select Vertical Stretch in the Size & Position menu).
during your presentation (note: applies only to options having their own key, such as
Color, Tint, Detail, Contrast, Brightness, Volume, Pixel and Position).
to cancel).
TIME-OUTS
5 seconds
15 minutes
30 seconds
5 seconds
15 minutes
3-11
OPERATION
Enter
.
or
.
Enter
to save and return to the
Filter
or
to gradually
to activate a slidebar
Enter
or
or
Enter
5
to save (or
Advertisement
Table of Contents
