L. Remove Screen Protector
•
Cut the tape on top of the screen protector. See Figure
14.7.
•
Open the screen protector and remove the screen. See
Figure 14.8.
Figure 14.7 Cut Packaging Tape
Figure 14.8 Remove Screen Protector
M. Unpackage the Hood & Floor Cover
Remove parts package from appliance as shown in Fig-
ure 14.9.
Figure 14.9 Removing Parts Package
34
Heatilator • Novus B-Vent Series • 4055-188 • Rev G • 03/09
N. Install Hood
•
Locate the four screws just inside the upper section of
the appliance.
•
Slide the hood into position uncer the screw heads.
•
Tighten the four screws. See Figure 14.10.
Figure 14.10 Intalling Hood
O. Install Floor Cover
Install the fl oor cover as shown in Figure 14.11.
Figure 14.11 Installing Floor Cover
Note: The fl oor cover in the bottom front of the fi replace may
be covering the UL labels.
replaced.
It is loose and can be removed/