Replacing Fixed Glass Assembly; Remove Screen Protector; Unpackage The Hood - Heatilator NNXT4236IF Installation Manual

• Install the right middle log by aligning the slot and hole
in the bottom of the log with the two pins on the right
end of the left bottom log.
Figure 11.10 Install Right Middle Log
• Install the top right Y log by aligning the slot on the
bottom of the log with the pin on the right side of the
back log. The Y end of the log should rest on the top
indent in the right middle log and the top of the right
bottom log.
Figure 11.11 Install Top Right Y Log
K. Replacing Fixed Glass Assembly
• Set the glass panel on the lower two or four glass
assembly latches, ensuring the glass panel is centered
in the opening.
• Replace glass latches. See Figure 11.4.
L. Remove Screen Protector
• Cut the tape on top of the screen protector. See
Figure 11.12.
• Open the screen protector and remove the screen. See
Figure 11.13.
Heatilator • NNXT4236IF, NNXT4236ILF, NNXT3633IF, NNXT3633ILF Installation Manual • 4055-980 Rev. D • 9/15
Figure 11.12 Cut Packaging Tape
Figure 11.13 Remove the Screen
M. Unpackage the Hood
Remove hood from appliance as shown in Figure 11.14.
Figure 11.14 Removing Hood
HOOD
45