Remove Screen Protector 4; Unpackage The Hood & Floor Cover; Install Hood 4; Install Floor Cover 4 - Heatilator NBV3630I Owner's Manual

L. Remove Screen Protector
• Cut the tape on top of the screen protector. See Figure
14.7.
• Open the screen protector and remove the screen. See
Figure 14.8.
Figure 14.7 Cut Packaging Tape
Figure 14.8 Remove Screen Protector
M. Unpackage the Hood & Floor Cover
Remove parts package from appliance as shown in Fig-
ure 14.9.
Figure 14.9 Removing Parts Package
4 Heatilator • Novus B-Vent Series • 4055-188 • Rev I • 08/09
N. Install Hood
• Locate the four screws just inside the upper section of
the appliance.
• Slide the hood into position uncer the screw heads.
• Tighten the four screws. See Figure 14.10.
Figure 14.10 Intalling Hood
O. Install Floor Cover
Install the floor cover as shown in Figure 14.11.
Figure 14.11 Installing Floor Cover
Note: The floor cover in the bottom front of the fireplace may
be covering the UL labels.
replaced.
It is loose and can be removed/