Drive The Digital Output - LevelOne FCS-1040 User Manual & Spare Parts Catalogue

enableblc
(r/w)
blcsenslevel
(r/w)
blcarea(0)
(r/w)
blcarea(1)
(r/w)
blcarea(2)
(r/w)
blcarea(3)
(r/w)
blcarea(4)
(r/w)
blcarea(5)
(r/w)

Drive the Digital Output

Note: This request requires the privilege of I/O access control.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/setdo.cgi?do1=<state>[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=<return page>]
Where state is H, L. H means NC (normal close) connected with COMMON and L means NO
(normal open) connected with COMMON. The number of DO dependents on the server type.
parameter Value
<state>
do<num>
return <return page>
0 or 1 Disable or enable back light compensation.
0~7 Set back light compensation level
0~255 First row in BLC area. 0 to indicate disabling
all sub windows. 255 to indicate enabling all
sub windows.
0~255 Second row in BLC area.
0~255 Third row in BLC area.
0~255 Fourth row in BLC area.
0~255 Fifth row in BLC area.
0~255 Sixth row in BLC area.
description
H – NC connected with COMMON
L – NO connected with COMMON
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according the the current path. If you omit