Using Built-In Flash - Pentax K-5II Operating Manual

72

Using Built-in Flash

1
Press the E button.
3
The built-in flash pops up and begins
charging. When the flash is fully charged,
E appears in the viewfinder and on the
LCD panel. (p.36, p.38)
2
Press the shutter release button fully.
The picture is taken.
When the mode dial is at B, the flash is not discharged if the lighting
conditions do not require flash for correction even when the flash is
popped up.
[Flash On] is used if the flash is popped up when the mode dial is at a
position other than B.
3
Push down on the portion
indicated in the illustration to
retract the built-in flash.