Inserting The Battery; Charging The Battery - Pentax K-5II Operating Manual

Inserting the Battery

Insert the battery into the camera. Use only a D-LI90 battery.

Charging the Battery

When using the battery for the first time, or when the battery has not been
used in a long time, or when [Battery depleted] appears, recharge the
battery.
Note: AC plug cord "Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)"
Lithium-ion battery
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Face the 2 mark on the battery up and insert it into the
battery charger.
The indicator lamp is lit during charging and turns off when the battery is
fully charged.
4
When the battery is fully charged, remove the battery from
the battery charger.
Indicator lamp
3
1
2
AC plug cord
Battery charger
49
2