Adjusting The Brightness Of The Monitor - Pentax K-5II Operating Manual

260
2
Press the four-way controller (5)
and use the four-way controller
(23) to select a display time.
3
Press the 4 button.
4
Use the four-way controller (23) to select [Histogram],
[Bright/Dark Area] or [Enlarge Instant Review].
5
Use the four-way controller (45) to select O or P.
When [Enlarge Instant Review] is set to O (default setting), you can
magnify the image with the rear e-dial (S). (p.211)
6
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.

Adjusting the Brightness of the Monitor

You can adjust the brightness of the monitor.
9
1
Select [Brightness Level] in the [R Set-up 2] menu and
press the four-way controller (5).
The [Brightness Level] screen appears.
2
Use the four-way controller (45)
to adjust the brightness.
You can select from 15 brightness levels.
The value is reset to ±0 when the |
button is pressed.
Instant Review
Display Time
Histogram
Bright/Dark Area
Enlarge Instant Review
MENU
Cancel
Brightness Level
+2 +2
MENU ±0
Cancel
1sec.
3sec.
5sec.
Off
OK OK
OK OK