Table of Contents
Advertisement
Setting Live View
You can set the display and autofocus mode for Live View.
1
Select [Live View] in the [A Rec. Mode 4] menu and press
the four-way controller (5).
The [Live View] screen appears.
2
Press the four-way controller (5)
and use the four-way controller
(23) to select an autofocus
method.
I
Face Detection
AF
i
Contrast AF
S
Phase Difference
AF
3
Press the 4 button.
4
Use the four-way controller (23) to select [Show Grid]
and press the four-way controller (5).
Gives autofocus priority to detected faces and performs
contrast autofocus. A yellow frame appears for a main
face (white frames appear for other faces), and
autofocus and automatic exposure are performed for
the main face. (default setting)
The face detection is not performed when the focus
mode is set to \.
Displays Live View and performs autofocus based on
the information obtained from the image sensor.
Cancels Live View and performs autofocus with the AF
sensor.
If the shutter release button is pressed halfway during
Live View, the Live View image will disappear and the
autofocus system operates. Once focused, the Live
View image will be displayed again.
Live View
Autofocus Method
Show Grid
Info Overlay
Histogram
Bright/Dark Area
MENU
Cancel
147
4
OK
OK
Advertisement
Table of Contents
