Table of Contents
Advertisement
180
Setting a File Format
You can set the format of image files.
Captures images in JPEG format. (default setting)
JPEG
You can change the number of recorded pixels in [JPEG Recorded
Pixels] and the image quality level in [JPEG Quality].
RAW format is a CMOS sensor output format saved without
processing.
Effects of White Balance, Custom Image and Color Space are not
RAW
applied to the captured images, but they are saved as actual original
information. When you perform the development process by using the
[RAW Development] function (p.238), you can create JPEG images
with these effects.
Images are saved in both RAW and JPEG formats.
When [One Push File Format] is assigned to the |/Y button, you
RAW+
can press the |/Y button to temporarily change the file format and
save an image in both file formats. (p.181)
6
When Extended Bracketing, Digital Filter, HDR Capture or Cross Processing is
set, the file format is set to [JPEG] and cannot be changed. To change the file
format, turn these functions off.
1
Select [File Format] in the [A Rec. Mode 1] menu and
press the four-way controller (5).
2
Use the four-way controller (23)
to select a file format.
When the file format is changed, the
number of recordable images appears at
the top right of the screen.
3
Press the 4 button.
4
Press the 3 button.
The camera is ready to take a picture.
File Format
JPEG Recorded Pixels
JPEG Quality
AF Settings
Lens Correction
Cancel
MENU
120
JPEG
JPEG
RAW
RAW+
OK
OK
Advertisement
Table of Contents
