Quick Reference Instructions - Amana LD10MP Owner's Manual

Quick Reference Instructions

Read "Important Safety Information" before using "Quick
Reference Instructions". If there are unanswered
questions, see detailed sections of this manual.
Interrupting Operation
• Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
START pad to resume oven operation. Display
continues to show countdown time. Press START pad
to resume oven operation and countdown timing.
Canceling Mistakes
• If oven is operating, press STOP/RESET pad once to
stop oven, then again to clear display.
• If oven door is open and time shows in display, close
oven door and press STOP/RESET pad to clear
display.
Operating Preprogrammed Pads
1. Open oven door, place food in oven, and close oven
door.
2. Press desired number pad(s).
3. Oven stops heating and oven signal sounds when
heating timing elapses.
Manual Time Entry
1. Open oven door, place food in oven, and close door.
2. Press TIME ENTRY pad.
3. Press number pads to enter desired cooking time.
4. Press desired power level pad to change power level.
5. Press START pad.
6. Oven stops heating and oven signal sounds when
heating timing elapses.
Part No. 12474310/3828W5A2495
Printed in Korea
Preprogrammed Number Pads
1. Open oven door.
2. Press and hold pad 1 for approximately 5 seconds.
3. Press desired number pad.
4. Press number pads to enter desired cooking time.
5. Press desired power level pad to change power level.
6. Press START pad to save new heating time and
7. Press STOP/RESET pad or close oven door to exit
Multiple Heating Stages
1. Open oven door.
2. Press pad 1 for approximately 5 seconds.
3. Press desired number pad.
4. Press number pads to enter desired cooking time.
5. Press desired power level pad to change power level.
6. Press TIME ENTRY pad.
7. Press START pad to save new heating time and
8. Press STOP/RESET pad or close oven door to exit
www.amanacommercial.com
power level in oven memory.
programming mode.
power level in oven memory.
programming mode.
2002 Amana Commercial Products
Amana, Iowa 52204