Operation; Interrupting Operation; Canceling Mistakes; Operating Preprogrammed Pads - Amana LD10MP Owner's Manual

Operation

!
CAUTION
To avoid fire, do not dry newspapers or clothes in
microwave oven.

Interrupting Operation

• Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
START pad to resume oven operation.
• Press STOP/RESET pad to interrupt operation.
Display continues to show countdown time. Press
START pad to resume oven operation and countdown
timing.

Canceling Mistakes

• If oven is operating, press STOP/RESET pad once to
stop oven, then again to clear display.
• If oven door is open and time shows in display, close
oven door and press STOP/RESET pad to clear
display.

Operating Preprogrammed Pads

Oven has 10 ~ 20 preprogrammed number pads.
Instructions are written for factory programmed ovens.
Ovens that are reprogrammed can respond differently
than described below.
1. Open oven door , place food in oven, and close oven
door.
• If pad is not pressed in 30 seconds, open and close
oven door again.
2. Press desired number pad.
• Oven operates and time counts down.
3. Oven stops heating and oven signal sounds when
heating timing elapses.
Operating QTY 2X Pads
QTY
1. Press Pad.
2X
2.
Press desired number pad
• Example : press + = 18 sec.
QTY 1
2X
Preprogrammed Times and Cook Level
All preprogrammed pads arrive set at full power.
Option: Single Digit
Heating
Pads Pads
Times
1 10 sec.
2 20 sec.
3 30 sec.
4 45 sec.
5 1 min.
6 1:30 min.
7 2 min.
8 3 min.
9 4 min.
0 5 min.

Manual Time Entry

Manual Time Entry feature allows the operator to enter
time and power levels, and heat without changing the
preprogrammed pads.
1. Open oven door, place food in oven, and close door.
• Display shows "READY".
• If pad is not pressed in 30 seconds, open and close
oven door again.
2. Press TIME ENTRY pad.
• Display shows "00:00".
3. Press number pads to enter desired cooking time.
• For example, to heat for 2 minutes 30 seconds,
press 2 , 3, and 0 pads.
4. Press desired power level pad to change power level.
• If a power level pad is not pressed, oven defaults to
100% power.
• For example, pressing MEDIUM 50% pad sets oven
to 50% power.
• Display shows current power level if other than 100
percent power.
5. Press START pad.
• Oven operates and time counts down.
6. Oven stops heating and oven signal sounds when
heating timing elapses.
13
Option: Double Digit
Heating
Pads
Times
01 10 sec. 11
02 20 sec. 12
03 30 sec. 13
04 45 sec. 14
05 1 min. 15
06 1:30 min. 16
07 2 min. 17
08 3 min. 18
09 4 min. 19
10 5 min. 20
Heating
Times
20 sec.
40 sec.
1 min.
1:30 min.
2 min.
3 min.
4 min.
6 min.
8 min.
10 min.