Quick Reference Instructions - Amana DQ22HS Owner's Manual

Quick Reference Instructions

Read "Important Safety Information" before using "Quick
Reference Instructions". If there are unanswered
questions, see detailed sections of this manual.
Interrupting Operation
• Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
START pad to resume oven operation.Press START
pad to resume oven operation and countdown timing.
Canceling Mistakes
• If oven is not operating, press RESET pad to clear
display. If oven is operating, press RESET pad once to
stop oven, then again to clear display. If oven door is
open and time shows in display, close oven door and
press RESET pad to clear display.
Operating Preprogrammed Menu Items
1. Open oven door, place food in oven, and close door.
2. Press desired menu pad if different than menu
displaying.
3. Press two numbers for menu item to be cooked.
4. Press number pad to enter quantity.
5. When cycle is complete, oven stops and signal
sounds. Open oven door and remove food.
Manual Time Entry
1. Open oven door, place food in oven, and close door.
2. Press TIME ENTRY pad.
3. Press numbers to enter desired cooking time.
4. Press POWER LEVEL pad.
5. Press numbers to enter desired power level.
6. Press START pad and oven operates.
7. Oven stops and signals when timing sequence is
finished. Open oven door and remove food.
Programming Menu Items
1. Open oven door.
2. Press and hold pad number 1 for five seconds.
3. Press ADD to begin programming.
4. Press desired menu pad to be preprogrammed.
5. Press two number pads representing menu item.
6. Press number pad to enter quantity.
7. Press numbers to enter desired cooking time.
8. Press POWER LEVEL .
9. Press numbers to enter desired power level. New
power level displays. .
10. Press START pad to lock new heating time and
power level in oven memory.
11. Press RESET pad or close oven door to exit
programming mode.
Part No. 10492915
Printed in U.S.A.
To change quantity limit:
• Press hidden enable pad. Locate hidden enable pad to
the immediate left and slightly down from the MENU 1
pad. Signal sounds.
• Press number pad to enter quantity limit. Maximum
quantity limit for each menu item is nine.
• Press START to save new quantity limit.
Programming Multiple Heating Stages
1. Complete steps 1-9 of "Programming Menu Items".
2. Press STATUS pad to move through stages from
3. Press number pads to enter desired cooking time
4. Repeat steps 2-3 for additional stages.
5. Complete steps 10-11 of "Programming Menu Items".
Programming Pause
• Press PAUSE pad after entering cooking time.
• Oven stops, displays "PAUS" and signals three times
halfway through cooking cycle. "PAUS" remains in
display until door is opened or STOP/RESET pad is
pressed.
• To resume microwave power, close oven door and press
START pad. Pause can be programmed into menu
items, and can also be programmed when using time
entry.
Deleting Items
1. Open oven door.
2. Press pad 1 for five seconds.
3. Press desired item to be deleted.
4. Press DELETE pad twice.
5. Press RESET pad or close oven door to exit
User Options
1. Open oven door.
2. Press and hold pad 1 for approximately 5 seconds.
3. Press hidden enable pad.
4. Press START pad to advance to other options.
5. Press STATUS pad to change option.
6. Repeat steps 4-5 to change additional options.
Modifying User Time Limits
1. Complete steps 1-3 of "User Options".
2. Press desired menu pad to change.
3. Press numbers to enter desired heating time limit.
4. Press corresponding menu pad again to save time
5. Press RESET pad or close oven door to exit
www.amanacommercial.com
lowest to highest (1 to 4).
and power level.
programming mode.
limit.
programming mode.
© 6/98 Amana Appliances
Amana, Iowa 52204