Cleaning - Amana LD10MP Owner's Manual

Cleaning

Part
Interior, Exterior, and Door
Discharge Air Vents
Intake Discharge
Control Panel
LD10MP
1000 WATT
10 PROGRAM PADS
1
TIME
ENTRY 2
HOLD
3
0%
DEFROST
20%
4
MEDIUM
50%
5
MED-HI
70%
6
QTY
2X
7
STOP
8
RESET
9
START
0
3 COOKING STAGES
Splatter Shields
Description
Clean microwave oven with mild detergent in warm water using soft
sponge or cloth. Wring sponge or cloth to remove excess water before
wiping equipment. If desired, boil a cup of water in microwave oven to
loosen soil before cleaning.
Important:
• Do not use abrasive cleansers or cleaners containing ammonia.
These could damage finish.
• Never pour water into microwave oven bottom.
• Do not use water pressure type cleaning systems.
Check monthly for a buildup of cooking vapors along intake and discharge
louvers on bottom and back of oven. Clean air vents with damp cloth to
ensure proper airflow. Dry thoroughly.
Open oven door to deactivate oven timer. Clean with mild detergent in
warm water using soft sponge or cloth.
Splatter shields can be cleaned in place or removed. Clean with mild
detergent in warm water using soft sponge or cloth.
Splatter shields are held in place with (3) screws. If desired, remove
splatter shields for cleaning by removing screws. Replace splatter shields
before using oven.
16