User Options - Amana LD10MP Owner's Manual

User Options

Follow the instructions below to customized the
microwave oven's operation. End-of-cycle signal,
maximum heating time and other options can be changed
to meeting your cooking needs.
1. Open oven door.
• If door is closed or RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press and hold pad 2 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows
"OPTION".
3. Press number pad that matches desired option.
• "OP" represents optional program mode, first
number represents option number and second
number represents functions currently selected for
option.
Numbered Pads
Numbered Pads Display
1
1 OP:10
End of Cycle Beep
End of Cycle Beep OP:11
OP:12
2
2 OP:20
Speaker Volume
Speaker Volume OP:21
OP:22
OP:23
3
3 OP:30
Key Beep
Key Beep OP:31
4
4 OP:40
Keyboard Enable
Keyboard Enable OP:41
Window
Window
5
5 OP:50
Add Time during
Add Time during OP:51
Heating
Heating
6
6 OP:60
Reset Door Open
Reset Door Open
OP:61
7
7 OP:70
Maximum Heating
Maximum Heating OP:71
Time
Time
8
8 OP:80
Manual Operation
Manual Operation OP:81
9
OP:90
Double Digit OP:91
Display Options ( ) = Factory Setting
Options ( ) = Factory Setting
OP:10 3 second continuous beep
3 second continuous beep
OP:11 (Continuous Beep until door is opened)
(Continuous Beep until door is opened)
OP:12 5 beeps bursts until door is opened
5 beeps bursts until door is opened
OP:20 Eliminates beep
Eliminates beep
OP:21 Sets volume to low; 60-70dB
Sets volume to low; 60-70dB
OP:22 Sets volume to medium; 70-80dB
Sets volume to medium; 70-80dB
OP:23 (Sets volume to high; 80-90dB)
(Sets volume to high; 80-90dB)
OP:30 Prevents signal when pad is pressed.
Prevents signal when pad is pressed.
OP:31 (Allows signal when pad is pressed.)
(Allows signal when pad is pressed.)
OP:40 (30 seconds after oven door is opened, keyboard disabled)
(30 seconds after oven door is opened, keyboard disabled)
OP:41 2 minutes after oven door is opened, keyboard disabled
2 minutes after oven door is opened, keyboard disabled
OP:50 (Prevents adding heating time while oven is heating.)
(Prevents adding heating time while oven is heating.)
OP:51 Allows adding heating time while oven is heating.
Allows adding heating time while oven is heating.
OP:60 (Cancels heating time count down after door is opened during
Cancels heating time count down after door is opened during
cycle.)
cycle.
Allows oven to resume heating time countdown after door is
OP:61
(Allows oven to resume heating time countdown after door is
opened during cycle.
opened during cycle.)
OP:70 Allows 10 minutes of heating time.
Allows 10 minutes of heating time.
OP:71 (Allows 60 minutes of heating time.)
(Allows 60 minutes of heating time.)
OP:80 Allows use of preprogrammed pads only.
Allows use of preprogrammed pads only.
OP:81 (Allows use of manual time entry and preprogrammed pads.)
(Allows use of manual time entry and preprogrammed pads.)
(Allows use of single digit only.)
Allows use of double digit only.
4. Press START pad to advance to next option. See
table for options.
5. Press number pad (0,1-3) to change option.
6. Press START pad to save changes.
• Repeat steps 4-6 to change additional options.
7. Press STOP/RESET pad or close oven door to exit
programming mode.
OP 11
Optional Program
Indicator
15
Pad Option
Number Selected