User Options - Amana RFS511MP Series Owner's Manual

Commercial microwave oven
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

User Options

1. Open oven door.
• If door is closed or
before finishing programming sequence, oven
exits programming mode.
2. Press and hold pad 1 for approximately 15
seconds.
• After 15 seconds, signal sounds. Display shows
"P".
3. Press hidden pad.
• Displays shows "OP:1(0,1-3)".
• "OP" represents optional program mode, first
number represents option number and second
number represents functions currently selected
for option.
(START) pad to advance to next option.
4. Press
See table for options.
5. Press number pad (0,1-3) to change option.
Numbered
Display
Pads
1
OP:10
OP:11
2
OP:20
OP:21
3
OP:30
OP:31
4
OP:40
OP:41
5
OP:50
OP:51
6
OP:60
OP:61
7
OP:70
OP:71
OP:72
OP:73
8
OP:80
OP:81
9
OP:90
OP:91
0
OP:00
OP:01
(RESET) pad is pressed
Options
( ) = Factory Settings
Prevents adding heating time while oven is heating.
(Allows adding heating time while oven is heating.)
Sounds 3 second signal at end of heating cycle.
(Sounds 4 short signals at end of heating cycle.)
(Allows 99 minutes 99 seconds of heating time.)
Allows 10 minutes of heating time.
Prevents signal when pad is pressed.
(Allows signal when pad is pressed.
(Allows oven to resume heating time countdown after door is opened
during cycle.)
Cancels heating time count down after door is opened during cycle.
(Allows use of power levels.)
Prevents use of power levels.
Eliminates end of heating cycle signal.
Sets end of heating cycle signal volume to low.
Sets end of heating cycle signal volume to medium.
(Sets end of heating cycle signal volume to high.)
Sets oven to standard operation. Blower starts when oven operates.
(Sets oven to instant on operation. Blower starts when oven door is opened.)
(Allows use of variable time entry and preprogrammed pads.)
Allows use of preprogrammed pads only.
(Allows lockout to be programmed.)
Prevents lockout from being programmed.
6. Press
(START) pad to save changes.
• Repeat steps 4-6 to change additional options.
7. Press
(RESET) pad or close oven door to exit
programming mode.
Hidden
pad
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfs59mp seriesRfs58mp seriesRcs1050mp series

Table of Contents