Cleaning The Spa Interior; Pillow Care - Jacuzzi 2003+ ProTech LCD Series Owner's Manual

CAUTION: There are certain precautions to keep in mind when
draining your spa. If it is extremely cold, and the spa is outdoors,
freezing could occur in the lines or the equipment (see "WINTERIZ-
ING", page 38). On the other hand, if it is hot outdoors, do not leave
the spa's surface exposed to direct sunlight.
To drain your spa, perform the following steps:
1. Turn off power to spa at breaker.
2. Locate drain valve on front/lower plastic pan.
Hold larger (rear) body to prevent it from
turning, then loosen and remove the front
cap to expose underlying male hose threads.
3. Attach garden hose to exposed threads.
4. Gently rotate larger (rear) valve body 1/3 turn
counterclockwise to unlock drain valve.
5. Pull larger (rear) body outward to open drain.
6. After spa drains, perform steps 2-5 in reverse
order to close drain prior to refilling spa.
After refilling, turn on power to the spa and
follow the steps listed under "Start-Up
Instructions." Always fill your spa through
both filter wall fittings (page 1 1).

12.3 Cleaning The Spa Interior

To preserve the sheen of your spa's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect on the
surface. If you are not certain as to the suitability of a particular cleanser, con-
sult your authorized Jacuzzi Premium dealer. Regardless of the cleanser used,
use extreme care to assure that no soap residue is left on the surface. This could
cause severe sudsing when the spa is refilled.

12.4 Pillow Care

Remove and clean the headrest pillows as needed with soapy water using a cloth or
soft-bristle brush. To maintain water resistance and luster, apply a quality vinyl condi-
tioner once a month. Always remove the pillows when adding chemical shock treat-
ment to the spa water. The pillows can be returned to the spa when the sanitizer read-
ing drops below 5 ppm.
CAUTION: Never attempt to remove the pillows by pulling on them! The
pillows utilize a bolt-on design that prohibits removal without tools.
Page 36
1. Turn off power to spa.
2.
3.
4.
5.
Open Drain
Unlock
Drain