Connecting The Ft1Dr/De To External Devices; Data Cable (Ct-170) - Yaesu FT1DR Operating Manual

Set Mode
Tip
To use the SCU-18, install a dedicated driver to the PC. For downloading the dedicated driver and
installation manual, please go to the YAESU website homepage (http://www.yaesu.com).

Connecting the FT1DR/DE to external devices

Position information data can be exchanged between commercially sold GPS receivers
or other external devices by using the optional Data Cable (CT-170) or the Data Cable
2.5 (CT-176).
Tip
Connect the Data Cable (CT-170) and the Data Output Cable (CT-176) by referring to the instruction
manual for the GPS device to be used, and cable specifications on the next page.

Data Cable (CT-170)

g RXD (Serial data input [FT1DR/DE
Equipment])
h TXD (Serial data output [FT1DR/DE
Equipment])
k GND
144
CT-170 (option)
a RXD (Serial data input [FT1DR/DE
External
Equipment])
b TXD (Serial data output [FT1DR/DE
External
Equipment])
c GND
External
External