Convenient Functions; Dual Reception (Dw) Function; Vfo Dual Reception; Vfo Mode Priority Memory Channel - Yaesu FT1DR Operating Manual

Dual Reception (DW) Function

The FT1DR/DE is equipped with the following 3 types of Dual Reception Functions:

(1) VFO Dual Reception

(2) Memory Channel Dual Reception
(3) Home Channel Dual Reception
The transceiver checks the standby side signal reception over the frequency registered
to the selected memory channel (Priority Memory Channel) once approximately every
5 seconds. When the transceiver detects signal reception on the standby side, it starts
signal reception over the frequency registered to the selected memory channel.
Even while receiving a signal over the frequency registered to a priority memory channel
on the standby side, pressing p disables the Dual Reception function and allows for
transmission over the former active side frequency.
Example: Checking signal reception over a frequency registered to the priority memory
channel [90] (standby side), while receiving signal over [145.500 MHz] (active
side).
Frequency over which a signal is
being received.
The transceiver monitors signal
reception over the frequency
registered to the Priority Memory
Channel [90] (standby) and checks
it in intervals of approximately 5
seconds.
VFO Dual Reception
VFO mode Priority memory channel
1
Switch to the Memory mode.
Press and hold F for over 1 second to enter the Write
2
mode; F and the channel number blink on the LCD.
Turn O to select a memory channel, then press and hold
3
B for over 1 second.
Select a memory channel to prioritize for signal reception
(Priority Memory Channel). The "P" appears on the LCD.
Turn O to select a frequency for signal reception.
4
Select a frequency for continual signal reception in VFO
mode (active side).

Convenient Functions

When the transceiver receives a signal
over the frequency registered to the
priority memory channel [90], dual
reception stops and signal reception
switches to [90] (standby).
"P" is displayed.
"VDW" is displayed.
75